Sony PSP Mod & PSP Hacks Forums - View Single Post

Mythtron · 01-12-2008, 08:13 PM

Hi,

I have a phat PSP who's USB port at the top is messed up. By that I mean the pins are all bent and it basically doesn't work anymore. I am planning to replace the port, by removing it from the motherboard, and replacing it with a new receptacle.....(the part is here: digikey # 670-1190-1-ND)

So I'm wondering if anyone out there has attempted this before...if so, how? And if not, can you give some recommendations or theoretical instructions?

Thank-you

BTW: my motherboard is one of the originals, not the TA-82's...if it makes any difference, and thx again.

01-12-2008, 08:13 PM	#1 (permalink)
Mythtron Junior Member PSP User Join Date: Oct 2007 Location: Houston, TX Posts: 10 Firmware Installed: 3.90 M33	PSP USB Connector Hi, I have a phat PSP who's USB port at the top is messed up. By that I mean the pins are all bent and it basically doesn't work anymore. I am planning to replace the port, by removing it from the motherboard, and replacing it with a new receptacle.....(the part is here: digikey # 670-1190-1-ND) So I'm wondering if anyone out there has attempted this before...if so, how? And if not, can you give some recommendations or theoretical instructions? Thank-you BTW: my motherboard is one of the originals, not the TA-82's...if it makes any difference, and thx again.