View Single Post
Old Very N00B questions! After You get fw 1.5, whats the next step? 04-11-2008, 09:27 PM   #5 (permalink)
killerbeez
Junior Member
 
Join Date: Apr 2008
Posts: 3
Firmware Installed: 3.72

Default Very N00B questions! After You get fw 1.5, whats the next step?

Well, I had my dad who's had lots of experience soldering and what not try the pandora mod, but I had a small board of chips not a big one like all the tut's show, but I still had the sc9x whatever chip and we got the right solder off, but i think he grounded something out cause a small wiff of smoke went up. BUT, i figured I'd still try it, it still works like a regular battery except of course you have to turn the psp on ac power first. and it still holds a charge so i dunno if it messed up?

Anyways, I used the executable that does the ms format for the magic memory stick and ran that, put the battery in with the card and all that happens is all three led's turn on, and stay on, not blinking, for a bout ten seconds then turn off, nothing happens. the psp still works fine though,

so my question is, what's my next step? would you say the battery is bad or something with Memory stick isn't right?

THANKS A GAGILLION FOR ANY HELP
killerbeez is offline  
Reply With Quote