Quote:
Originally Posted by Kellicros  I have just transferred the the trims but I couldn't get the metal pieces out from my stock case to reuse them, any help would be great.
BTW, not sure if it has anything to do with the case swap but my Memory Stick slot just stopped locking my MS a while ago, the MS kept springing out from the slot and I think something is stuck in there that I could not press the MS deep enough to lock it, I tried to press really hard but it just wont goes down, any idea? |
To get the squares out you have to push from the front side. You should be able to see a bit of metal. Use a tiny flat screwdriver and pry up on that an push really hard, it doenst feel like it moves much, but I kept doing that and they came out. Some cases have tiny rubber pieces in the hole that you may have to take out to see the metal part.
There are a few reasons for the slot cover not working. If youve got the clear case you should be able to see inside. Are the flexible parts hitting anything inside? If the slot assembly is not seating down far enough, it will actually hit the mem card slot itself. Ive alos had the rubber part itself start coming off the plastic cover, part, were you can see the 8 small legs of the cover go into the flexible part. Any of that help?