Pandora Questions: PSP-110 Battery Small Board

[Midian]

I got another psp and I have this battery as well.

Unfortunately, there is nothing you can do. I removed (what I thought was the EEPROM chip) but it failed. It does, however, make my psp turn on faster lol. This battery can not be hard-modded into a jigkick battery.....yet. I'm trying to find a way.

[Midian]

OMFG BREAKTHROUGH WITH THE NEW BATTERIES!!!!!!!!!!

Ok i was messing around with my battery and I found this out:

1)The battery is the newer model. Serial number CGA-4B101B aka "The non hard-moddable battery" or "the psp 110b2 battery"
2)The LO2 chip is a complete LIE! DONT BELIEVE ANYTHING YOU HEAR ABOUT IT. Removing any pin from the LO2 chip will ruin the battery. Meaning it cannot be charged after you remove any pin.
3)I believe i found the actual EEPROM controling chip. Its the chip directly across from the rectangular chip. Cant read the name of it. But heres why i believe this is it:

I removed my LO2 chip because i got pissed that it didnt work.
So today i started messing around (getting a new battery tomorrow)

I'm not to smart at circuits but I assumed since the LO2 chip wasnt it, it must be one of the others. Probably a more protected one. The 3 in the back are the most protected. The white hipoxy covers 2 of them so that only leaves that one available.
So i finally got the chip uncovered and removed one of the pin (the 4th pin on the left) and tried using it. My psp didnt turn on. The battery was useless. So i retried and removed the 4th pin on the right side. Now my battery works.
So i think i removed the 1st pins, not hte 4th pins. im going to test out removing the other 2 pins and seeing if im correct. I will edit this post when i find out.

EDIT:

OK tried it. battery = useless.
I removed the ? pim on the left, didnt do anything. Battery was still usable.
then tried removing the ? pin on the right and battery is dead. wont turn on my psp.

and now my top connecter (the actual circuit board) came off >.<
dont try what I did...unless you want to destroy a battery.

Well, this battery isnt useless yet. Its mad of magnesium, lithium, and zinc.
I can make a nice little explosive from the magnesium and hydrogen peroxide. Perhaps use the lithium and make a batch of methamphetamine that i can sell to some idiot kids that want to be cool. idk. so many possibilities with this "useless" battery. Perhaps i will just throw it away instead of g-cycling lol.

[spikeyz]

hey i also have the same battery and i have removed pin-1 and pin-4 from the lo2 chip. battery=still working but could not pandorize it. i was just wordering can this battery be softmod?? after all tampering with the pins? or all pins have to be intact in order to softmod? or this batt is a total waste hardmod has shown negative results if some one cud confirm softmod results. dont wanna buy another batt