[bboylayz]

Thanks a million! I used clear tape and taped a wire to the contacts (took so many tries because it's so tiny) to pandorize my battery for the install then i just took the tape out and it worked amazingly. You are a godsend, I couldn't find any easy pandora tutorials for the slim battery til this. So thanks!

[xFalkenx]

WOW wished i found this yesterday. Since i took my only battery to my new 5 day old slim and F**Ked it. I shorted it out or something aahhh phooey

This needs to be a Sticky just because

[eddieve]

hello
thank you for this were is the best web for the 3,71-4 pandor memory card i got a slim with 3.60 stand on it if can help thank you
Eddie

[arshidshahul]

thnx jayL..... it worked very well...

good one... keep it up...
________________________________________

[whysolate]

Those of you who have done it, is that the place I should solder the wire ends?

[JayL]

Yeah, this is the place to solder the wires,
but I would recommend not to solder to the traces
but solder to the small electrical parts directly.
I think i's easier.

[whysolate]

Originally Posted by JayL

Yeah, this is the place to solder the wires,
but I would recommend not to solder to the traces
but solder to the small electrical parts directly.
I think i's easier.

thanks a million

[Rohit_CoolDude812]

Is this method possible fr fat?

[JayL]

Yeah it's possible, I'll post a pic where the points are
later when I'm at home.

edit: i don't find my fat battery but here's a pic
of the two points to solder i found somwhere else:

[madmoxx]

Hey nice work, but does your swtich work =?

I build it like u . But my switch doesn`t work. i cant play in battery mode.

Please Help ??????!!!!!!!!!!!!!!!!!!



Sorry 4 my bad english

[JayL]

Of course it works. i use it every day ^^
check all soldering connections for
any shorts. if everything is right
check your switch again with a multimeter.
did you short something when soldering?

[madmoxx]

No there are no shorts. i have now put the switch of. but it doesn`t work as a normal battery. When i put the battery into my psp it turns on alone and i have a plack screen and the orange led for MS on the left side turns on.

if i did a short at solder i dont remember. u think i did ??

[jack_rudolph]

@ JayL

Ok here's the thing....... I too want to hard mod my battery [PSP-S110] using single wire method ....... But my battery is made in Japan ....... & i'v heard that new batteries that are made in japan are pandora proof ....... But i dont know whether they are softmod proof or hard mod proof or both soft & hard mod proof ........ So if you know anybody that has the same battery (made in japan) who got the hard mod to work.... then let me know .... cos i will not go for the mod until & unless i'm 100% sure that it'll work ........ If you want to help me out then please reply in the thread that i have started in HARDWARE section Thread Name is :- Battery Confusion - [Made in China/Japan] ...... I could have posted the url to the thread but forum rules state that you should have atleast 15 post before you could post the url ......... Thanks

[JayL]

@jack_rudolph: I made a post in your thread jack

@madmoxx: It could be, but I don't know...
I have the same problem with one of my fat batteries.

[madmoxx]

I think maybe the dats of the battery are deleted and so the battery "think"that it is still a pandora.
It is possible that i copy the battey information from a normal battery and play it on the pandora ???