Internalizing my PhotoFast CR-3100 - Page 35

XxG!Ns3nGxX · 02-24-2009, 05:41 AM

oh i c, the white switch is the one that's telling the psp that theres a disc inside and the switch at the top left corner is the one that is telling the psp that the umd door is close. So, would you suggest that i dremmel out some of the case or should i leave that white switch up. I dont want to remove that white switch because i might put the umd drive back in. (in the future that is). And also, thanks for the fast response rgarjr

rgarjr · 02-24-2009, 05:52 AM

dremel'ing would be the same as removing the little lever on the switch. The ideal thing would be to de-solder the switch but its a pita, so most dudes just yank out the little level.

Actually, now that I think about it, why would you wanna dremel out the case. The 3100 board is sitting on top of that switch. Unless of of course you want it really loose that there is no pressure on it.

rgarjr · 03-10-2009, 07:22 AM

Finished doing this mod a few days ago. Have 2 16GB SDHC cards with a combine storage of 29GB.

It's just so nice having plenty of storage space.

Pirate-King · 03-10-2009, 01:12 PM

Actually to be really honest,cr-5400 is much better coz it doesnt need internalization..
Moreover,if incase something is wrong with the ribbon cable,you cant even use MS in it without opening the entire thing again.

eyelykeknives · 03-12-2009, 06:12 AM

dang i wanna do that but mines filled with 2 speakers

Stgdemon · 03-12-2009, 12:23 PM

Do you have to take any of the insides out for this mod (I.E. the disk spinner, read lens, etc)? I just put a jewel in, and UMDs don't fit, so I'm wondering if the thickness will be an issue.

Pirate-King · 03-12-2009, 02:43 PM

Quote:

Originally Posted by Stgdemon

Do you have to take any of the insides out for this mod (I.E. the disk spinner, read lens, etc)? I just put a jewel in, and UMDs don't fit, so I'm wondering if the thickness will be an issue.

Hmm..i dont think jewels will be an issue.I have seen many of them with jewels.
Check this out:
http://www.pspmod.com/forums/psp-gen...-my-psp-d.html (Bored? Well comment on my psp!!! =D)

Yeah you will have to remove the umd drive completely.

LtHorn · 03-19-2009, 02:25 AM

Is anyone having problems on a phat with loading off of the cr-3100? i did an internal mod a few weeks ago, and ever since it freezes while loading sometimes.
the read/write light flashes like crazy for like 4 seconds then flashes slowly until you pull the battery out, or pull the mem stick out.

wolfschramm · 03-20-2009, 10:25 PM

wich is a good sdhc to buy? a recommendable brand? is it the Sandisk Ultra ll SDHC 16GB SD Secure Digital C2 a good choice?

rgarjr · 03-20-2009, 11:36 PM

I run the Transcend Class 6 cards and works great.

wolfschramm · 03-21-2009, 03:32 AM

ok man, thx a lot!!, BY THE WAY, DID YOU BUY THEM AT EBAY? CUZ on ebay it says that the sdhc trascend are used, and also they have new sdhc, so where do i should buy them?

kalon · 03-25-2009, 08:41 PM

Can some please tell me why its not working on my psp phat i have cfw 5.00 m33-6 and when i have the photo fast cr-3100 plugged in and i try to turn it on the screen just stays black and the LED just flashes like crazy how ever i can go in to the recovery menu but the LED still flashes and as soon as i ext the screen just goes black, can any one tell me how to make it work.

rgarjr · 03-25-2009, 10:58 PM

Bad cards or faulty unit.

DumpsterDiver · 04-10-2009, 03:15 AM

Syph.. ='[. Forget about the mods, we still love you.

Look at the first post in this topic.

JohnStamos66 · 04-14-2009, 01:14 AM

have you guys noticed that if you brick your going to have to open up your psp to put in a magic gate supported memory stick. Well, for me, thats a chance I'm going to have to take.