you press X
| || |
Hi, recently i discovored you could use your psp as a second monitor but first you had to have CFW installed, one thing led to the next two days later i found myself rigging up my battery to make it a pandora battery and making a MMS. First I made a MMS with the Open Source Pandora Battery Tool 0.52. I belive that was successful. Then I opened up my battery and rigged it to be a pandora battery. That I believe also to be successful, no poofs of smoke, no accidental scrapes on the mobo, just a clean cut to one of the connectors. Now when i turn on my psp it says and i quote
Tachyon = 0x00300000, Baryon=0x00040600
Pommel = 0x00000104, Syscon DK =0x7FFF
Model : PSP Standard (TA-81)
Press X to install 3.80 M33
Press 0 to install original 3.80
Press  to dump the nand
Press L+R+start+home to restore nand dump phisically (dangerous!)
BTW I have a PSP flat, the info on the white barcode on the bottom of the PSP reads
Where do I go from here in order to get the CFW installed? Thank you
I did that, it installed a bunch of files. Then it told me to press X to shutdown the psp, I did that also. Now when i turn it back on it read the same screen as before.
Could you explain how i screwed up my battery? I cut the battery in a way i could easily repair it if needed.
pandoras cant be used as normal batterys
you should just get a new one
yes but i would still like some answers to my previous post. basically, what did i do wrong. I would like to know that before i give up on this battery.
you didnt do anything wrong just pandoras cant be used as normal battery so get a new one and if anything goes wrong youll have a pandora to fix it
This is the procedure I went through to hard mod it. I had the standard sony 3.6v 1800 mAh. I opened it up found the IC04, and cut the fourth one. Was this wrong?
|« European UMD on American PSP | YoYo Games- Game maker 8 »|