Help with ISO's not showing up.

[Kiroshin]

Well I have my F: drive which is my psp, I then open that up and create a folder called 'ISO'. Aftewards I drag my Naruto ISO into that folder. Then I go into configuration and change the two settings but there is still no game on my memory stick. Only PSP Update ver 1.50 and Despertar del Cementerio. Help!

[kabuto_101]

ok you need fastloader 0.7

[Kiroshin]

Thanks Kabuto for trying in the chat box. The fastloader just shows corrupt data when I go to it, can anyone else help?

[Youngkezzy]

Originally Posted by Kiroshin

Well I have my F: drive which is my psp, I then open that up and create a folder called 'ISO'. Aftewards I drag my Naruto ISO into that folder. Then I go into configuration and change the two settings but there is still no game on my memory stick. Only PSP Update ver 1.50 and Despertar del Cementerio. Help!

you try look in your recovery menu?

[Kiroshin]

Look for what?

[Casual]

Ok here is what I'm on and it works perfectly for me.
Firmware 4.01 M33-2

First off Re-format your memory card, but make sure you back up the things you need to save.
Go to the System Settings in your PSP and select Reformat memory card.

Go into the Recovery Menu.
- Shut off your PSP completely *Hold the off switch for atleast 10 sec*
- Hold the R Trigger and turn on your PSP.

Go to Advanced ->
Go to Advanced configuration ->
- Disable Plain modules... and Execute BOOT.BIN... make sure they are both disabled.

It now works.

Also make sure your ISO folder is in the root of your PSP.

[Kiroshin]

Alright well I'll try to update to that version and see if it works. Btw, those two functions have always been disabled for me o_O

[Casual]

Well make sure you re-format your memory card after you are done upgrading to a new firmware version.

[Kiroshin]

Casual, could you possibly give me the settings you have such as the M33 NO UMD settings and the XMD Memory or w/e (Memory Stick)


Edit: Even with the update, I'm still getting the 'there are no games' after I put my CSO into the ISO folder. The folder is in the correct place etc etc.

My memory stick is also legit, it says its supported.

I just feel so hopeless.. it seems like I'm the only one with this problem..

[Casual]

I use M33 driver -NO UMD- sometimes I switch it to Sony NP9660 -NO UMD- if some ISO's aren't working.

If none of these things are working, it might be your memory card. Where did you buy it and what brand is it?

I'm using a 4 Gig Magic Gate Pro Duo.