
How to create a Pandora's Battery and Slim MS without a Fat PSP
Right so i used the GUI. I had to download the EBOOTS though and i downloded the extra files needed also. So i ran through the GUI step by step carefully so as not to miss anything out. I then copied the files from the depertar v3 folder as i am running ofw 3.60 on a slim, onto the memory card at the highest point it could go (which, correct me if i'm wrong is the root). Still time and time again nothing happens with the memorys reading light when i insert my batter. I you've read this thread you'll have noticed that i asked somebody pior to this post how i MSPFORMAT the memory stick. It didn't mention to do this in the GUI ( did it?) and if this is what i have to do in order to make this work would somebody pease kindly tell me how to do it. What i mean to say here is do i have to install the mspformet file onto the psp or do i run it on m pc and if so how come notjingregisters on mpsp when i try either? thanks p.s the battery i'm using is thed atel battery only its designed solefully for use with the slim it's 3.6v 1200mAh. could this be a problem? i'm assuming it isn't, although i just thought i'd check with anybody, see if they knew otherwise??????
Last edited by daviesi6 : 12-22-2007 at 08:04 PM.
Reason: what battry i'm using
|