[wolryder]

ok i must be stupid cause i cant seem to get the battery apart i cut along the left short side and the seal is broken but it wont come off i saw smoke a bit but battery is still good any suggestions

[xwizardx]

Originally Posted by crazy5

Wait Im confused can u give me a guide on how to use the catb50s mms creator
like wut folders to them in n wut to do.plz

Catb50's MMS Creator is already noob friendly, not that I'm calling you worse than a noob.

Anyway, you should read the "Readme" text. It should tell you what to do, if not, try clicking the "BEGIN" MS-DOS batch file, you'll be fine as long as you read the on screen instructions.

[Kuaijin]

Okay yeah I'm having slight issue with this. I type in mspformat\mspformat.exe G
Get the thing to Format I type in Y and press enter next thing I know it says Open Error <read>
Anyone have this same issue?

I ran command prompt as Admin and I get the Write Error thing when i try doing the same thing. Maybe I'm dumb or something but now I'm lost entirely.

Oh sorry just to let everyone know my PSP is a FAT PSP and its a PSP-1001
It's currently running OFW 3.73 I'd like to put CFW on it since Playstation Store has yet to put any new RPGs up for download yet besides Wild Arms and I'm tired of waiting for them.

[MIDORI_FOX]

[xXLIGI-ITNINGXx]

you didnt type y after f lol and yea i have a slight problem to... ill put a picture up



i definatly need help... does this guide work more than once?

[MIDORI_FOX]

Originally Posted by xXLIGI-ITNINGXx

you didnt type y after f lol and yea i have a slight problem to... ill put a picture up



i definatly need help... does this guide work more than once?

lol ty i thought to hit enter then y =p

i dont know what your is doing lol

try the easy installer

[Solie]

Originally Posted by wolryder

ok i must be stupid cause i cant seem to get the battery apart i cut along the left short side and the seal is broken but it wont come off i saw smoke a bit but battery is still good any suggestions

You have to cut the seal all the way around, cept for the connector parts. If you were cutting and you saw some smoke, that probably means you cut into the battery. I did the same thing and it still worked, but I tossed it after I had finished everything I needed it for. The best thing to do to see your progress is to try lifting open the plastic to see inside. Run your blade parallel to the crack and lift a little. High lighting helps alot too.

[MIDORI_FOX]

yeah the guide says

type the following command "mspformat\mspformat.exe X" ( where X=psp drive letter) note: NO quotation
- hit Y, then enter
- it should say "Drive succesfully formatted, and partition moved."

and i do the first part but it doesn't say drive succesfully formated and partition moved

[Cyanide]

Ok so I got my battery open but there is some silver foil wrapping around it.. what do I do now?

[Kuaijin]

Okay thanks to Nate Benton on here I found an easier way to do all the formating and what not without making your head hurt.

Haven't posted enough to post a link

Just run that Program and folow the steps. Worked for me. Still doing the Battery thing though. Can't seem to get the dang thing open. I'll post and let everyone know if I got mine to work.

[MIDORI_FOX]

Originally Posted by Kuaijin

Okay thanks to Nate Benton on here I found an easier way to do all the formating and what not without making your head hurt.

Haven't posted enough to post a link

Just run that Program and folow the steps. Worked for me. Still doing the Battery thing though. Can't seem to get the dang thing open. I'll post and let everyone know if I got mine to work.

i tryed the cat thing but i got some of the same error messages
like can blah blah loggical drive or other shit like acess denied
and im admin to so why anything is denied i dont know

im also useing a official sony 4 gig card

wich i think might be a problem

and i cant get my pandora batery to work(its not fried yet =P) and for the guy with the battery question do the totorial

[Cyanide]

I have done the tutorial my battery looks a lot different then your guys.. The pin is to small to unsolder or what not...

[MIDORI_FOX]

Originally Posted by Cyanide

I have done the tutorial my battery looks a lot different then your guys.. The pin is to small to unsolder or what not...

yeah lol the tutorial and not the video says you can cut the line conected to that pin

[Kuaijin]

See your lucky still trying to open my battery lol
Think I've been at it for 20 mins now trying to open it.

[xXLIGI-ITNINGXx]

Originally Posted by Cyanide

Ok so I got my battery open but there is some silver foil wrapping around it.. what do I do now?

ok dude i have the same battery... the board is at the top not under the foil so just follow the instructions and cut the peg off with something not metal... and make sure its the right leg