Find the side with the indentation. That's the top, and pin one is on the top left. The pin you want is the fifth one counter-clockwise from there. That would make it the bottom right pin.
| | |
| |
04-14-2008, 05:19 PM Howdy,
I finally decided to create a Pandora's Battery by hardmodding,
so I bought a PSP-110 battery from Huuto.net (something like eBay).
From the outside, it looks exactly like the original one, except for some differences on the backplate.
The packaging says "Made in Japan", though the battery says "Made in China". It's not the new model btw.
I'm not sure about the original packaging, but the printquality of mine looks pretty poor on the backside.
Anyways, here's the batterycover:
And now the real problem.
The inside of the battery looks completely different from what I've seen. This turns out to be pretty troublesome,
since even after further searching I was not able to find a guide to mod this kind of battery.
So, here it is:
As you can see, I've located already the chip I need to modify. But unfortunatly I can't tell which pin I need to lift.
In case it helps, the chip says "8922 BE6318", though I'm not 100% sure, as it is even for me difficult to read.
I hope to get some help from you guys.
Thanks in advance.
PS: Sorry, if the images are too large, but I can't post any URLs and I wanted to make them cleary visible.
04-14-2008, 05:58 PM Find the side with the indentation. That's the top, and pin one is on the top left. The pin you want is the fifth one counter-clockwise from there. That would make it the bottom right pin.
04-14-2008, 07:31 PM So you mean this one?
o = indentation
EDIT: Oh, yeah right. Matched it with other guides. o.o
Thanks a lot for your help. ^_^
Last edited by Void; 04-14-2008 at 07:36 PM.
12-19-2009, 07:26 PM so have you succesfully hardmodded this battery? i have the same board and find different guides saying to cut different parts off. i just need someone to tell me the exact chip and pinOriginally Posted by Void
So you mean this one?
o = indentation
EDIT: Oh, yeah right. Matched it with other guides. o.o
Thanks a lot for your help. ^_^
12-19-2009, 07:37 PM It's better to just spend the $6 on a Pandora rather than hacking your Battery apart, risking a $40 loss. :x My opinion.
12-19-2009, 07:55 PM
done
12-19-2009, 08:23 PM my battery doesnt have the small black chip. only the big one. do any of you have a battery like that?
done
12-19-2009, 08:25 PM so whats the model number of your battery? because i was helping the guy with a 110 battery. in order for it to be pandoraized it MUST be a official sony battery
| « PSP Mod Gear Launches | i have a model-110 battery. i need help with it » |
