gonna need to be a little more specific on what screws they are.
| || |
I am changing the backplate on my PSP but I cant take two of the screws out. I cant take the motherboard and the charge screws out.
How can I take them out?
I'll post some pictures on now.
Here are the pictures, sorry for the bad quality.
Last edited by daniel489; 11-14-2008 at 04:56 PM. Reason: pics
I'm guessing you're struggling with the screws that are behind the warranty label under where the battery should be. If I recall correctly, some of the screws are smaller than others and ultimately need a smaller screw driver to get to them.
They're screwed in very tightly, I can't turn them at all.
In the worst case scenario, you could cut apart your backplate... I mean, you're changing it for a new one anyways, right? :P
I managed to cut it and changed the cover. The cover wont close properly because I accidentally used some of the black screws inside that I was meant to use on the outside. Nothing a little bit of super-glue cant fix.. Right?
Superglue should work
lol you shouldnt of cut open your case. Just get opliers and use it to hold onto the screwdriver and turn. Much easier if your using one of thoese small ones which burn your skin if you turn too hard
|« Any1need help in helping mood anythin 2 do with firmware bricks pandora mms post here | help me plz »|