| | |
| |
09-10-2010, 01:27 AM So the thing is that i changed my psp housing after putting everything together i tryed to turn on the psp and nothing come up on the screen. So i took it part again made sure everything was in and still the screen wouldnt turn on.
Please help i miss playing my psp
09-10-2010, 01:38 AM make sure the ribbon cables for the screen are plugged in correctly...does the backlight come on?
09-10-2010, 01:38 AM do you hear sound, or does the umd drive go when you put a game in?
09-10-2010, 02:07 AM i dont hear any sound at all and i dont believe its the backlight all i know when i turn it on theres no sound and the screen doesnt boot up, just like a brick
09-10-2010, 02:12 AM open it back up and check those ribbons then, the little one can be tricky if you dont have tiny hands
09-10-2010, 02:15 AM somethings unplugged,somethings not snaped in fully something shortcircited because you touched wires screws are too loose and too tight.honestly with replacing a full housing it could be anything.but if you get a green power light but no sound or screen you may want to look into the speakers and the screen being in all the way.
another thought,you did put the right housing together for the psp right?your not one of those trying a brain scheme to put a 3000 housing on a 2k or a phat are you?many possibilities really hard to say since we caant know what you did.you could also have the wires in backwards or upside down.possible i guess.anything is really.i know thats prolly not the answers you wanted to hear but unless you can find a way for us to actually have in possession this housing project we cant physically know whats wrong just suggest
09-10-2010, 02:54 AM its the right housing ( i have a 2000 by the way) right now it could be anything ,i made sure the second time to make sure everything was in its right place so i dont know. i really dont know whats the problem but ill try to do what people suggest
09-10-2010, 03:01 AM This happened to my 2000 before but its a screw touched the board and fried it. Make sure not even one thing is out of place on the board. Please post pics it would be easier to help you.
09-10-2010, 03:25 AM
[IMG]http://i158.photobucket.com/albums/t96/SerikaKurusugawa/DSC04292.jpg[/IMG
i wasnt sure where you guys wanted me to take pictures so i took pictures where the bus wires were
09-10-2010, 03:27 AM Well, the connections to his LCD look ok.
09-10-2010, 03:31 AM double check all those wires, that second to last pic had a wire not all the way in, looks like the ones to the dpad but if that ones loose then the others might be..nvm i see its the ones for the X and O buttons
...just lightly tug it a few times and watch if it comes out or move
edit: also on the 2 pic, is that wire not fully plugged in above the long ribbon for the monitor?....looks a lil crooked
Last edited by TheMeek; 09-10-2010 at 03:34 AM.
09-10-2010, 03:42 AM Did you by chance rip the tab on the motherboard to the thin ribbon cable to the lcd screen. Sort looks like it. Thats the one in charge of the back lighting. Make sure it is put in properly.
Also when you turn it on does the led light up to indicate that its on.
09-10-2010, 03:49 AM yes the light for power turns on but the light on the left side where the memory stick doesnt and yea it did rip but rip or not it still wont turn on
09-10-2010, 04:03 AM When you turn it on does the screen light up with a black screen or is it still off with no power at all?
09-10-2010, 04:09 AM no power at all its just like when you get fully brick theres no sound and boot up...nothing
| « UMD Drive | How-To: Switchable Pandora PSP-Slim Battery (Hard-Mod) » |
