PSP Error Message Thread

[lommer]

PS1 Game Load Error CA000005 : This error comes up when you dont have the KEYS.BIN file in the same folder as your EBOOT.PBP

RSS feed load error code Channel could not be added error code(80100D00)
reformat the memorystick to fix this error.

the saved game cant be load the memory stick could not be accessed. (80110305)
backup the savedata folder and reformat your memorystick.

Error number 80020148: This error comes up when you try to use emulators, homebrew games on a psp with version 1.52 and higher.

Error number 80410d07: This error comes up when you try to connect your psp to wireless router.change psp settings to manual and enter in all of the ip,dns,subnet mask, and default router info .

Error number 80410410 ...Connection to the Server Failed. A DNS error has occurred. Unplug your modem and router (if you got one) for 30 seconds to a minute. Plug in your modem first. Wait another 30 seconds to a minute before plugging in your router.

Error number (8008271D)An internal error has occured (8008271D)flash1 is corrupted
after restoring your settings after upgrading from DA's 2.71SE to DA's 3.02OE... your network settings will give that error.

First 4 digits indicate the functional area that reported an error :
8002 is the kernel
8001 is the standard libc (and the error numbers correspond to the POSIX errno.h constants).

an easy way to find your error on the list, press control + F and type it in and search...

0x80010013 = (device / media not found)

[apathy96]

Updated, thanks for the input lommer

[mime]

We needed this around, this is a MUST sticky..


GReat job Apathy!!! This will help me and many others. damn errors :P

[lommer]

Error number 80020321 :this game could not be started: when you don't have a umd game disc in the drive and trying to run iso/cso.
fix: put any umd disc in the drive (no movie disc).

An internal error has occurred.(80020321) or Format failed.(80220180)
problem: a corrupted memorystick or a fake memorystick most of the time when opening the stick .


Errror ffffffff : when downgrading firmware 2.00 to 1.50 at 99% it says the update failed. contact the sony computer entertainment technical support line for assistant. THIS IS OKAY. DO NOT PANIC. Hold the power switch up for 4 seconds until your PSP fully turns off.
Turn your PSP back on. You will get a corrupt settings error with a blue background.
Just press the "O" button and your PSP will restart with repaired settings.
your PSP should then go through the setup process again.

Error 80410A0B: when you try to scan for networks .. you get "An internal error has occurred. (80410A0B)"
fix:try changing the wlan power save on and off in power save settings...

[kibosher]

hi i got an error but its not on the list.

the error is:

this game could not be started.
(80010002)

it happens when i run my backup cso of sid meiers pirates.

[davis]

I get 8008271D when I try to access my system settings menu after flashing.

[Mwasim1]

Originally Posted by kibosher

hi i got an error but its not on the list.

the error is:

this game could not be started.
(80010002)

it happens when i run my backup cso of sid meiers pirates.

LOOK AT MY SIG I HAD THE SAME PROBLEM ......THEN I GOOGLED IT <-

[Sauron]

Hi

I have just upgraded my 2.81fw PSP to 3.03fw then down to 1.50fw then to 3.030e-c firmware, blah blah blah in able to play ISO games on my memory stick.

Like an idiot i formatted my memory stick now everytime i have tried to load an ISO game i get an error of 80020321 what have i done wrong? And what can i do to rectify this? (Using the hammer is not an option)

OK i have now kinda resolved this problem i needed to enable no umd loader in the recovery console but now when it tries to load the game it freezes what can i do about this? The game is Need for Speed most wanted 5.1.0 and says its been tried and test with 3.10oe-a is the problem i have im using the wrong firmware?

Sauron

[the begginer]

you need to have a umd in the drive and disable no umd option and it will work.

[pee17]

Hii i recently got Worms Armageddon and everything seem to work fine.. the psone logo pop up the preview run fine, and after that the screen just goes blank, and nothing loaded up .

I also have problem with Crash Bandicoot 1 the game never loaded n a error message appear up sayin the game could not be started 80000004

Please Help
THESE GAMES ARE MY FAVOURITE AND I REALLY WANT TO PLAY

Thanks anyways

[Mwasim1]

Originally Posted by pee17

Hii i recently got Worms Armageddon and everything seem to work fine.. the psone logo pop up the preview run fine, and after that the screen just goes blank, and nothing loaded up .

I also have problem with Crash Bandicoot 1 the game never loaded n a error message appear up sayin the game could not be started 80000004

Please Help
THESE GAMES ARE MY FAVOURITE AND I REALLY WANT TO PLAY

Thanks anyways

Found these solutions online
Hopefully one of them will work...........

1)
Did you put your psx game in the game150 or game folder? Because I remeber I had a problem running psx games but it was only because I put it in the wrong folder. If its in the game150 put it in the game folder.

2)
If you have 3.03 and you get an Error 80000004 while trying to play PSX games on you PSP then make sure you have applied the OE-B Patch. Even if you think you are running OE-B find and apply the patch anyways it should fix everything )

3)
the error has something to do with the savedata memcard1.dat and memcard2.dat. swapping one of these files with one from another save directory (like swapping memcards on a real ps1) causes this error.

Unfortunately I havenââ‚ƚ¬Ã¢â€žÂ¢t a clue how to go about making a utility program
to do this, so hereâ₠¬Ã¢â€žÂ¢s how to do it with a hex editor.

4 offsets need to be altered with a hex editor after you create the
eboot.pbp with popstation. Using Castlevania SOTN as an example:

offset | default value | change to
†â€?ââ ‚¬â€?à ƒÆ’¢â‚¬Ã ƒÂ¢Ã¢â€šÂ¬Ã…“+à¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚¬Ã¢ââ₠¬Å¡Ã‚¬?ââ‚à ƒâ€šÃ‚¬ÃƒÂ¢Ã¢â€šÂ¬?â ۉâ ¡Ã‚¬?ââ‚Ã⠀šÃ‚¬ÃƒÂ¢Ã¢â€šÂ¬?âà ƒÂ¢Ã¢â‚¬Å¡Ã‚¬Ã¢â‚à ‚¬?ââ‚ ¬Ã¢â‚¬?-+â₠¬ÃƒÆ’¢â‚¬?âà¢ÃƒÂ¢Ã¢â€šÂ¬Ã…¡Ã‚¬Ã¢â‚¬?à ƒÆ’ƒÂ¢Ã¢â€šÂ¬à ƒÆ’¢â‚¬?ââà ƒÂ¢Ã¢â€šÂ¬Ã…¡Ã‚¬Ã¢â‚¬?ÃƒÆ ’Ã†â€™Ãƒâ€šÃ‚Â¢ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡Ãƒâ€šÃ‚Â¬ÃƒÆ ’¢â‚¬?ââà¢Ã¢â€šÂ¬Ã…¡Ã‚¬Ã¢â‚¬?-
00130 | SCUS94476 | SCUS00067
00358 | Hot Shots Golf 2 | Castlevania SOTN
50400 | _SCUS_94476 | _SCUS_00067
5122c | Hot Shots Golf 2 | Castlevania SOTN

(use hex value 00 to clear out remaining character spaces after game
name)

Thatâ₠¬Ã¢â€žÂ¢s all it takes, when you copy the game to your PSP, if you press
triangle and look at the game information itâ₠¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢ll say whatever game name
you entered at 00358 instead of Hot Shots Golf 2. When you load the game
itâ₠¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢ll make a save directory named SCUS_whatever-number-you-entered (for
best results, use the correct disc number). When you look at the save
data in the XMB itâ₠¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢ll be named whatever you entered at 5122c instead of
Hot Shots Golf 2.

If this is done for each game converted, there will be no issues with
gamesaves overwriting each other, as each game will have itâ₠¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢s own save
folder.

If you do a search for 94476, youââ‚Âà ‚¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢ll also come across the following
string:

UP9000-NPUI94476_00

Do -NOT- change this string or youââ‚Âà ‚¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢ll get error 80020148 when you try
to load the game.

4)
Heres what you do. Get DA's latest firmware 3.03 OE-B. Here (http://dl.qj.net/dl.php?fid=12202)

Then Convert you legally owned PSX aka PS1 games via your favorite flavored image/iso/bin/cue ripper. I used ISO Buster.

This is the important Step So Pay attention...
EXTRACT IT AS A .BIN
NOT AS A .ISO
ISO DOESNT WORK FOR RIPPED/EXTRACTED PSX aka PS1 games.

Then make it into a EBOOT.PBP with the KEY.BIN

(If you need instructions I will do my best to write them out later on in this thread. I need you to request it first. Here is a good attempt of how to. (http://www.youtube.com/watch?v=kVNnBWcVXpY))

I prefer to use a GUI interface bc I loathed DOS. I recommend you downloading This one right here. (http://dl.qj.net/dl.php?fid=11982)

Make a folder (Mine was called SCUS94164) in the PSP/GAME folder

So it should look like this

PSP\GAME\SCUS94164\EBOOT.PBP and also KEYS.BIN

Be sure to set your kernal in 3.03 oe-b (not sure if it works in 1.5)

GOOGLE IS A PSP'S Best Friend.

[pee17]

thanks for helpin, PopStation GUI v1.0 was really useful, but for my other games problem, i didnt really quite understand because im a 3.40eo a user and this is really new to me. The game i got was in the right folder and everything, and it does load up but only the intro though and after that it just goes blank. I'd check config. if my kernel is right, which im sure it is and im sure it shouldnt need to use a umd for a psx games. I also change the folder name of the game folder because it does help with marvel vs capcom. I basicly tried everything i can think of, even try running it wit an emulator but the file is eboot.bpb witch im sure it shouldnt need a emulator anyways no matter wat i do the game never seem to run pass the intro. And this problem only occur on some games because most of my games work really well.


I REALLY LIKE TO THANK YOU AGAIN FOR TRYING TO HELP

[Mwasim1]

Originally Posted by pee17

thanks for helpin, PopStation GUI v1.0 was really useful, but for my other games problem, i didnt really quite understand because im a 3.40eo a user and this is really new to me. The game i got was in the right folder and everything, and it does load up but only the intro though and after that it just goes blank. I'd check config. if my kernel is right, which im sure it is and im sure it shouldnt need to use a umd for a psx games. I also change the folder name of the game folder because it does help with marvel vs capcom. I basicly tried everything i can think of, even try running it wit an emulator but the file is eboot.bpb witch im sure it shouldnt need a emulator anyways no matter wat i do the game never seem to run pass the intro. And this problem only occur on some games because most of my games work really well.


I REALLY LIKE TO THANK YOU AGAIN FOR TRYING TO HELP

If the intro starts and the game does not you might have to delete and convert again...

[pee17]

Thanks For The Thread

[psppppp]

how to solve error 80020148?????