Thread: Error Code List (what error's mean what)

Page 1 of 3 123 LastLast
Results 1 to 15 of 42
  1. #1 Error Code List (what error's mean what) 
    Banned I Modded My PSP
    Join Date
    Jun 2009
    Posts
    221
    Geek9: I've stickied this, a bit fuller then the other I believe, will be maintaining, so useless posts go
    Obtained from Errors - PSPWiki

    == Introduction ==

    Sometimes the PSP gives an error, but what does it mean? How to solve it?

    On this page you'll find the information that you need:


    == Normal errors ==

    The first 4 numbers gives information about the place of the error:
    8002XXXX = Kernel
    8001XXXX = The standard libc


    00000001
    Internal Error
    1. Reset your settings to default
    2. Theres no WiFi point found

    80020148
    The game could not be started
    If you're under an Official Firmware you can't run homebrew, downgrade/upgrade to an Custom Firmware.

    8002013C
    Error in the flash memory of the PSP.
    Try to restore your flash0-backup or re-install the Custom Firmware.

    80020321
    The game could not be started
    Check if you configured kernel or UMD/ISO mode right.

    8008273A
    Internal Error
    Reset your settings to default

    80108D50
    PSP Camera not connected

    80410A0B
    Hardware Error
    WiFi is damaged.

    == IDstorage errors ==

    DRNFFFFFFD8 = key 0x4 missing
    DRNFFFFFFD7 = key 0x4 header is not "n y r B" (in hex: 6E 79 72 42)

    DRNFFFFFFCE = key 0x5 missing
    DRNFFFFFFCD = key 0x5 header is not "g k l C" (in hex: 67 6B 6C 43)

    DRNFFFFFFC4 = key 0x6 missing
    DRNFFFFFFC3 = key 0x6 header is not "r d D M" (in hex: 72 64 44 4D)

    Errors with TA-086 PSP motherboards:

    DRNFFFFFFB9 = key 0x7 header is not "D a P A" (in hex: 44 61 50 41)

    DRNFFFFFFB0 = key 0x8 missing
    DRNFFFFFFAF = key 0x8 header is not "p D C L" (in hex: 70 44 43 4C)

    You can repair this with IdStorage Manager.

    For key 08 errors make a new key 08 by adding this line:
    "70 44 43 4C 01 00 00 00 0C 00 00 00 76 FC 19 C8 0A 00 19 00 10 00 0D 00 07 00 02" and than 00 untill the end.

    CTA80000025 = region key (0x0100) is damaged or missing (You only can repair this with your OWN backup).



    == Errorlist: ==

    * UKN9000001 = The update cannot be started. The data is corrupted.
    * 80110305 = Load failed.The [[Memory Stick]]™ could not be acessed.
    * 80010013 = device / media not found
    * 8001B002 = unknown
    * 80020001 or 800244C = kernel errors
    * 80020001 = generic kernel error (default)
    * 800200D9 = failed to allocate the memory block
    * 80020130 = file read error
    * 80020148 = PRX type unsupported
    * 80110482 = occurs when test of WLAN infrastructure connection fails
    * FFFFFED3 = unknown (might be decryption error)
    * 80410001 or 80410D16 = network errors
    * 80410D07 = unknown (possibly WLAN)
    * ffffffff = PSP update failed
    * 80410A0B = Internal Error
    * 8041040F = DNS Error, unable to connect to server
    * 80410410 = Cannot connect to the given acess point
    * 80010087 = The game could not be started
    * 0x0 = no error
    * 0x80020001 = error
    * 0x80020002 = not implemented
    * 0x80020032 = illegal exception code
    * 0x80020033 = exception handler not use
    * 0x80020034 = exception handler already used
    * 0x80020035 = system call table notuse
    * 0x80020036 = system call table alraady used
    * 0x80020037 = illegal system call table
    * 0x80020038 = illegal Primary Syscall number
    * 0x80020039 = Primary Syscall number already use
    * 0x80020064 = call from interrupt handler/thread
    * 0x80020065 = illegal INTRCODE
    * 0x80020066 = CPU already interrupt disable
    * 0x80020067 = Handler already exist
    * 0x80020068 = Handler not found
    * 0x80020069 = illegal interrupt level
    * 0x8002006a = illegal address
    * 0x8002006b = illegal IntrHandler Option Paramsize
    * 0x8002006c = illegal stackad dress
    * 0x8002006d = alreadystackad dressset
    * 0x80020096 = not found free Hard Timer
    * 0x80020097 = illegal timer ID
    * 0x80020098 = illegal source
    * 0x80020099 = illegal prescale
    * 0x8002009a = Hard Timer in use
    * 0x8002009b = Hard Timer not setup
    * 0x8002009c = Hard Timer not in use
    * 0x800200a0 = unit number already used
    * 0x800200a1 = unit number notused
    * 0x800200a2 = rom directory notfound
    * 0x800200c8 = id type already exist
    * 0x800200c9 = id type not exist
    * 0x800200ca = {not available}
    * 0x800200cb = unknown UID
    * 0x800200cc = unmatch UID type
    * 0x800200cd = id not exist
    * 0x800200ce = not found UID function
    * 0x800200cf = UID already holder
    * x800200d0 = UID not holer
    * 0x800200d1 = illegal permission
    * 0x800200d2 = illegal argument
    * 0x800200d3 = illegal adress
    * 0x800200d4 = the memory area is out ofrange
    * 0x800200d5 = the memory areais over lap
    * 0x800200d6 = illegal partitionid
    * 0x800200d7 = partition in use
    * 0x800200d8 = illegal memory block allocation type
    * 0x800200d9 = failed toal loca the memory block
    * 0x800200da = inhibitedtores izethismemoryblock
    * 0x800200db = failedtoresize thismemoryblock
    * 0x800200dc = failedtoalloca teheapblock
    * 0x800200dd = failedtoalloca teheap
    * 0x800200de = illegalchunkid
    * 0x800200df = cannotfindchun kname
    * 0x800200e0 = thereisnofreec hunk
    * 0x8002012c = modulelinkerro r
    * 0x8002012d = illegalobjectf ormat(notPRX/PFX)
    * 0x8002012e = notfoundModule
    * 0x8002012f = notfoundModule file
    * 0x80020130 = Modulefileread error
    * 0x80020131 = memoryinuse
    * 0x80020132 = partitionmisma tch
    * 0x80020133 = modulealreadys tarted
    * 0x80020134 = modulenotstart edyet
    * 0x80020135 = modulealreadys topped
    * 0x80020136 = modulecannotst op
    * 0x80020137 = modulenotstopp edyet
    * 0x80020138 = modulecannotre move
    * 0x80020139 = exclusiveload
    * 0x8002013a = Libraryisnotli nkedyet
    * 0x8002013b = Libraryalready exists
    * 0x8002013c = Librarynotfoun d
    * 0x8002013d = illegalLibrary header
    * 0x8002013e = Libraryisusedn ow
    * 0x8002013f = modulealreadys topping
    * 0x80020140 = illegaloffsetv alue
    * 0x80020141 = illegalpositio ncode
    * 0x80020142 = illegalaccessc ode
    * 0x80020143 = modulemanagerb usy
    * 0x80020144 = illegalflag
    * 0x80020145 = cannotgetmodul elist
    * 0x80020146 = prohibitLoadMo duledevice
    * 0x80020147 = prohibitLoadEx ecdevice
    * 0x80020148 = unsupportedPRX type
    * 0x80020149 = illegalpermiss ioncall
    * 0x8002014a = cannotgetmodul einformation
    * 0x8002014b = illegalLoadExe cbuffer
    * 0x8002014c = illegalLoadExe cfilename
    * 0x8002014d = Thereisnoexitc allback
    * 0x80020190 = nomemory
    * 0x80020191 = illegalattrpar ameter
    * 0x80020192 = illegalthreade ntryaddress
    * 0x80020193 = illegalpriorit yvalue
    * 0x80020194 = illegalstacksi ze
    * 0x80020195 = illegalmode
    * 0x80020196 = illegalmask
    * 0x80020197 = illegalthreadI D
    * 0x80020198 = notfoundthread
    * 0x80020199 = notfoundsemaph ore
    * 0x8002019a = notfoundeventf lag
    * 0x8002019b = notfoundmessag ebox
    * 0x8002019c = notfoundVpool
    * 0x8002019d = notfoundFpool
    * 0x8002019e = notfoundmessag epipe
    * 0x8002019f = notfoundalarm
    * 0x800201a0 = notfoundthread eventhandler
    * 0x800201a1 = notfoundcallba ck
    * 0x800201a2 = threadalreadyD ORMANT
    * 0x800201a3 = threadalreadyS USPEND
    * 0x800201a4 = threadisnotDOR MANT
    * 0x800201a5 = threadisnotSUS PEND
    * 0x800201a6 = threadisnotWAI T
    * 0x800201a7 = nowdispatchdis abled
    * 0x800201a8 = WAITtimeout
    * 0x800201a9 = WAITcanceled
    * 0x800201aa = WAITstatusrele ased
    * N0x800201ab = WAITstatusrel easedwithcallback
    * 0x800201ac = threadistermin ated
    * 0x800201ad = semaphorecount erzero
    * 0x800201ae = semaphorecount eroverflow
    * 0x800201af = eventflagcondi tionnotoccur
    * 0x800201b0 = thiseventflagc annotacceptwaitswithmulti plethreads
    * 0x800201b1 = illegaleventfl agwaitpattern
    * 0x800201b2 = messageboxhave nomessage
    * 0x800201b3 = messagepipeisf ull
    * 0x800201b4 = messagepipeise mpty
    * 0x800201b5 = waitobjectdele ted
    * 0x800201b6 = illegalmemoryb lock
    * 0x800201b7 = illegalmemorys ize
    * 0x800201b8 = illegalscratch padaddress
    * 0x800201b9 = scratchpadinus e
    * 0x800201ba = scratchpadnoti nuse
    * 0x800201bb = illegaltype
    * 0x800201bc = illegalsize
    * 0x800201bd = illegalcount
    * 0x800201be = notfoundvtimer
    * 0x800201bf = illegalvtimerI D
    * 0x800201c0 = illegalKTLSID
    * 0x800201c1 = KTLSisfull
    * 0x800201c2 = KTLSisbusy
    * 0x80020258 = invalidsuchpri ority
    * 0x80020259 = devicenameisin valid
    * 0x8002025a = devicenameisun known
    * 0x8002025b = pminformationi sregisteredalready
    * 0x8002025c = pminformationi snotregistered
    * 0x8002025d = majorstateisin validvalue
    * 0x8002025e = requestisinval id
    * 0x8002025f = requestisunkno wn
    * 0x80020260 = unitnumberisin valid
    * 0x80020261 = cannotcancelre quest
    * 0x80020262 = pminformationi sinvalid
    * 0x80020263 = argumentisinva lid
    * 0x80020264 = alreadytargete powerstate
    * 0x80020265 = failedtochange systempowerstate
    * 0x80020266 = cannotchangede vicepowerstate
    * 0x80020267 = devicedoesnots upportsuchpowerstate
    * 0x800202bc = requesttotheDM ACfailed
    * 0x800202bd = DMAoperationis lessorequalone
    * 0x800202be = theoperationis alreadyqueued
    * 0x800202bf = theoperationis alreadyfinishedornotqueue ud
    * 0x800202c0 = theoperationis alreadyintransferprogress
    * 0x800202c1 = theoperationis notassignedyet
    * 0x800202c2 = thesyncoperati ontimedout
    * 0x800202c3 = dmaoperationst ructisalreadyfreed
    * 0x800202c4 = dmaoperationis used
    * 0x800202c5 = dmaoperationis empty
    * 0x800202c6 = DMAoperationis aborted
    * 0x800202c7 = DMAoperationis error
    * 0x800202c8 = physicalDMAcha nnelisalreadyreserved
    * 0x800202c9 = physicalDMAcha nnelisnotmanagedbydmacman ager
    * 0x800202ca = thereisaprivil egeaddressinlinklist
    * 0x800202cb = linklistbuffer isnotenough
    * 0x800202cc = theoperationis notassignedtophysicalDMAc hannel
    * 0x800202cd = theoperationis childoperation
    * 0x800202ce = itistoomuchtha ntransferabledatasize
    * 0x800202cf = argumentisinva lid
    * 0x80020320 = Toomanyopenfil es
    * 0x80020321 = Nosuchdevice
    * 0x80020322 = Cross-devicelink
    * 0x80020323 = Badfiledescrip tor
    * 0x80020324 = Invalidargumen t
    * 0x80020325 = Unsupportedope ration
    * 0x80020326 = Aliasisalready used
    * 0x80020327 = Cannotmount
    * 0x80020328 = Driverdeleted
    * 0x80020329 = Asyncoperation isbusy
    * 0x8002032a = Noasyncoperati on
    * 0x8002032b = Deviceisalread yregistered
    * 0x8002032c = Nocurrentworki ngdirectory
    * 0x8002032d = Filenametoolon g
    * 0x800203e8 = DECI3Nosuchdev iceoraddress
    * 0x800203e9 = DECI3I/Oerror
    * 0x800203ea = DECI3Notenough core
    * 0x800203eb = STDIOnotopened
    * 0x8002044c = Parameterisnot cachealigned
    * 0x8002044d = Endofkernelerrorcode.Neverusethisname
    * CA000005 - keys.bin not found when trying to run a PS1 game.
    * DADADADA - Running a FW Update in DAX custom FW
    * FFFFFFFF - PSP update failed
    * UKN9000001 - update cant start, data corrupt
    * 00000001 - WiFi error. Occurs when no access points are detected in official 3.7X and custom 3.7X firmware.
    * 80010087 - Error reading UMD or UMD not present
    * 80110305 - Load failed.The [[Memory Stick]] could not be acessed
    * 80020148 - Unsupported PRX type | This error also seems to appear when you are running an iso with a [[Fake Memory Stick|fake mem. stick]]
    * 8001006F - [[Remote Play]] connection error. Most likely when no PS3 is sending a signal over your network.
    * 800200D1 - Ran homebrew without Homebrew enabled firmware.
    * 8002014C - Ran kxploited homebrew without Homebrew enabled firmware.
    * 80020321 - Ran a game that doesn't support NO-UMD* (DAX FW ONLY!)
    * 80110404 - Network error, try restore default settings to fix
    * 80000004 - its just a general error code that the PSP spits out when it doesnt understand something could mean anything
    * 80110307 - Load Failed There is no Data available
    * 80010002 - Putting the POPS EBOOT in the wrong folder
    * 80000001 - Got it when trying to run PSP filer version 3.6 on 3.40* firmware
    * 80410A0B - Loose WiFi card
    * 80020321 - No umd in drive when no umd is disabled
    * 80110305 = Load failed.The [[Memory Stick]] could not be acessed
    * 8001006F - [[Remote Play]] connection error. Most likely when no PS3 is sending a signal over your network
    * 80020148 - Unsupported PRX type
    * 800200D1 - Ran homebrew without Homebrew enabled firmware
    * 8002014C - Ran kxploited homebrew without Homebrew enabled firmware
    * 80020321 - No umd in drive when no umd is disabled / Ran a game that doesn't support NO-UMD / "No-UMD Mode"
    * 98765432 - Selected a language who's font has been removed. DAX FW ONLY ERROR!
    * 80020148 - (unsupported PRX type)?
    * 800201A8 - (WAIT timeout)?
    * 80020130 - File Read Error (ex. length is 0)
    * 80020001 - Generic Kernel Error - default (ex. executable is invalid)
    * 800200D9 - Failure to allocate memory block (ex. missing PSP)
    * 80410D07 - Connection error has occurred. (Ie cant find access pt)
    * 80020001 - error
    * 80020002 - not implemented
    * 80020032 - illegal exception code
    * 80020033 - exception handler not use
    * 80020034 - exception handler already used
    * 80020035 - system call table not use
    * 80020036 - system call table already used
    * 80020037 - illegal system call table
    * 80020038 - illegal Primary Syscall number
    * 80020039 - Primary Syscall number already use
    * 80020064 - call from interrupt handler/thread
    * 80020065 - illegal INTRCODE
    * 80020066 - CPU already interrupt disable
    * 80020067 - Handler already exist
    * 80020068 - Handler not found
    * 80020069 - illegal interrupt level
    * 8002006a - illegal address
    * 8002006b - illegal Intr Handler Option Param size
    * 8002006c - illegal stack address
    * 8002006d - already stack address set
    * 80020096 - not found free Hard Timer
    * 80020097 - illegal timer ID
    * 80020098 - illegal source
    * 80020099 - illegal prescale
    * 8002009a - Hard Timer in use
    * 8002009b - Hard Timer not setup
    * 8002009c - Hard Timer not in use
    * 800200a0 - unit number already used
    * 800200a1 - unit number not used
    * 800200a2 - rom directory not found
    * 800200c8 - id type already exist
    * 800200c9 - id type not exist
    * 800200ca - {not available}
    * 800200cb - unknown UID
    * 800200cc - unmatch UID type
    * 800200cd - id not exist
    * 800200ce - not found UID function
    * 800200cf - UID already holder
    * x800200d0 - UID not holder
    * 800200d1 - illegal permission
    * 800200d2 - illegal argument
    * 800200d3 - illegal address
    * 800200d4 - the memory area is out of range
    * 800200d5 - the memory area is overlap
    * 800200d6 - illegal partition id
    * 800200d7 - partition in use
    * 800200d8 - illegal memory block allocation type
    * 800200d9 - failed to allocate memory block
    * 800200da - inhibited to resize this memory block
    * 800200db - failed to resize this memory block
    * 800200dc - failed to allocate heap block
    * 800200dd - failed to allocate heap
    * 800200de - illegal chunk id
    * 800200df - cannot find chunk name
    * 800200e0 - there is no free chunk
    * 8002012c - module link error
    * 8002012d - illegal object format (not PRX/PFX)
    * 8002012e - not found Module
    * 8002012f - not found Module file
    * 80020130 - Module file read error
    * 80020131 - memory in use
    * 80020132 - partition mismatch
    * 80020133 - module already started
    * 80020134 - module not started yet
    * 80020135 - module already stopped
    * 80020136 - module cannot stop
    * 80020137 - module not stopped yet
    * 80020138 - module cannot remove
    * 80020139 - exclusive load
    * 8002013a - Library is not linked yet
    * 8002013b - Library already exists
    * 8002013c - Library not found
    * 8002013d - illegal Library header
    * 8002013e - Library isused now
    * 8002013f - module already stopping
    * 80020140 - illegal off set value
    * 80020141 - illegal position code
    * 80020142 - illegal access code
    * 80020143 - module manager busy
    * 80020144 - illegal flag
    * 80020145 - cannot get module list
    * 80020146 - prohibit Load Module device
    * 80020147 - prohibit Load Exec device
    * 80020148 - unsupported PRX type
    * 80020149 - illegal permission call
    * 8002014a - cannot get module information
    * 8002014b - illegal Load Exec buffer
    * 8002014c - illegal Load Exec file name
    * 8002014d - There is no exit callback
    * 80020190 - no memory
    * 80020191 - illegal attr parameter
    * 80020192 - illegal thread entry address
    * 80020193 - illegal priority value
    * 80020194 - illegal stack size
    * 80020195 - illegal mode
    * 80020196 - illegal mask
    * 80020197 - illegal thread ID
    * 80020198 - not found thread
    * 80020199 - not found semaphore
    * 8002019a - not found event flag
    * 8002019b - not found message box
    * 8002019c - not found Vpool
    * 8002019d - not found Fpool
    * 8002019e - not found message pipe
    * 8002019f - not found alarm
    * 800201a0 - not found thread event handler
    * 800201a1 - not found callback
    * 800201a2 - thread already DORMANT
    * 800201a3 - thread already SUSPEND
    * 800201a4 - thread is not DORMANT
    * 800201a5 - thread is not SUSPEND
    * 800201a6 - thread is not WAIT
    * 800201a7 - now dispatch disabled
    * 800201a8 - WAIT timeout
    * 800201a9 - WAIT canceled
    * 800201aa - WAIT status released
    * N800201ab - WAIT status released with callback
    * 800201ac - thread is terminated
    * 800201ad - semaphore counter zero
    * 800201ae - semaphore counter overflow
    * 800201af - event flag condition not occur
    * 800201b0 - this event flag cannot accept waits with multiple threads
    * 800201b1 - illegal event flag wait pattern
    * 800201b2 - message box have no message
    * 800201b3 - message pipe is full
    * 800201b4 - message pipe is empty
    * 800201b5 - wait object deleted
    * 800201b6 - illegal memory block
    * 800201b7 - illegal memory size
    * 800201b8 - illegal scratchpad address
    * 800201b9 - scratch pad in use
    * 800201ba - scratchpad not in use
    * 800201bb - illegal type
    * 800201bc - illegal size
    * 800201bd - illegal count
    * 800201be - not found vtimer
    * 800201bf - illegal vtimer ID
    * 800201c0 - illegal KTLS ID
    * 800201c1 - KTLS is full
    * 800201c2 - KTLS is busy
    * 80020258 - invalid such priority
    * 80020259 - device name is invalid
    * 8002025a - device name is unknown
    * 8002025b - pm information is registered already
    * 8002025c - pm information is not registered
    * 8002025d - major state is invalid value
    * 8002025e - request is invalid
    * 8002025f - request is unknown
    * 80020260 - unit number is invalid
    * 80020261 - cannot cancel request
    * 80020262 - pm information is invalid
    * 80020263 - argument is invalid
    * 80020264 - already target epower state
    * 80020265 - failed to change system power state
    * 80020266 - cannot change device power state
    * 80020267 - device does not support such power state
    * 800202bc - request to the DMAC failed
    * 800202bd - DMA operation is less or equal one
    * 800202be - the operation is already queued
    * 800202bf - the operation is already finished or not queueud
    * 800202c0 - the operation is already in transfer progress
    * 800202c1 - the operation is not assigned yet
    * 800202c2 - the sync operation timed out
    * 800202c3 - dma operation struct is already freed
    * 800202c4 - dma operation is used
    * 800202c5 - dma operation is empty
    * 800202c6 - DMA operation is aborted
    * 800202c7 - DMA operation is error
    * 800202c8 - physical DMA channel is already reserved
    * 800202c9 - physical DMA channel is not managed by dmac manager
    * 800202ca - there is a privilege address in link list
    * 800202cb - link list buffer is not enough
    * 800202cc - the operation is not assigned to physical DMA channel
    * 800202cd - the operation is child operation
    * 800202ce - it is too much than transferable datasize
    * 800202cf - argument is invalid
    * 80020320 - Too many open files
    * 80020321 - No such device
    * 80020322 - Cross-device link
    * 80020323 - Bad file descriptor
    * 80020324 - Invalid argument
    * 80020325 - Unsupported operation
    * 80020326 - Alias is already used
    * 80020327 - Cannot mount
    * 80020328 - Driver deleted
    * 80020329 - Async operation is busy
    * 8002032a - No async operation
    * 8002032b - Device is already registered
    * 8002032c - No current working directory
    * 8002032d - Filename too long
    * 800203e8 - DECI3 No such device or address
    * 800203e9 - DECI3 I/O error
    * 800203ea - DECI3 Not enough core
    * 800203eb - STDIO not opened
    * 8002044c - Parameter is not cache aligned
    * 8002044d - End of kernel error code Never use this name
    Last edited by Geek; 09-27-2009 at 05:36 AM.
    Reply With Quote  
     



  2. #2  
    Senior Member PSP Mad Hacker
    Join Date
    Mar 2009
    Posts
    609
    already been posted, but hard to find, good post will link.
    Reply With Quote  
     

  3. #3  
    Junior Member
    Join Date
    Sep 2009
    Posts
    8
    I keep getting the massage error
    *80020321 - No such device
    *80010087 - The game could not be started
    *CA000006

    The last code im guessing it supposed to be CA000005 but it shows
    What can I do for this?
    Reply With Quote  
     

  4. #4  
    Junior Member PSP User
    Join Date
    Oct 2009
    Posts
    16
    tried to play gran turismo, needed to update to 5.55. tired to update and screen states "the game could not be started. (DADADADA)." what does dadadada mean?
    Reply With Quote  
     

  5. #5  
    The King Of Chinatown PSP Elite Hacker Geek's Avatar
    Join Date
    Jan 2009
    Posts
    6,563
    Quote Originally Posted by alltbdup View Post
    tried to play gran turismo, needed to update to 5.55. tired to update and screen states "the game could not be started. (DADADADA)." what does dadadada mean?
    means you're on a really old cfw that blocks regular updating




    I'm not a pirate. I am a 21st century Che liberating files from the capitalist overlords.
    How to check if you can mod your PSP

    Thanks MZ for a sleek sig!
    Reply With Quote  
     

  6. #6  
    Junior Member PSP User
    Join Date
    Oct 2009
    Posts
    16
    so im pretty much screwed?
    Reply With Quote  
     

  7. #7  
    The King Of Chinatown PSP Elite Hacker Geek's Avatar
    Join Date
    Jan 2009
    Posts
    6,563
    nope go to you're original thread and update to a later cfw




    I'm not a pirate. I am a 21st century Che liberating files from the capitalist overlords.
    How to check if you can mod your PSP

    Thanks MZ for a sleek sig!
    Reply With Quote  
     

  8. #8  
    Homebrew Creator PSP Elite Hacker Mobster's Avatar
    Join Date
    Dec 2008
    Posts
    1,718
    this is very helpful!
    Left4Quake donation complete!

    Left 4 Dead on PSP!
    Reply With Quote  
     

  9. #9  
    Junior Member
    Join Date
    Dec 2009
    Posts
    2
    I am running PSP 3000 ver 6.10, and my error message reads:

    "The copyright protection information is invalid." (8010850E)

    Do I need the 1.5 kernel m33-6
    Reply With Quote  
     

  10. #10  
    Banned PSP User
    Join Date
    Apr 2010
    Posts
    22
    Very helpful!!
    Reply With Quote  
     

  11. #11  
    Junior Member
    Join Date
    May 2010
    Posts
    1
    I have this error code 80020148 and what you say I don't understand, I have a firmware of 5.00 M33
    Reply With Quote  
     

  12. #12 Assassins Creed Error Message 
    Junior Member
    Join Date
    Jun 2010
    Posts
    1
    Hi, I am having an issue with Assasins Creed. I have 5.00 M33-6 and I am receiving error 80020148. I am sure that NO UMD is selected on the Recovery Menu and tried different NO UMD options.

    Any insight?
    Reply With Quote  
     

  13. #13  
    Spambuster Bitch PSP Elite Hacker dankgame's Avatar
    Join Date
    Feb 2009
    Posts
    4,412
    is the game patched for m33
    new members and old read thisvvvvvvvv
    http://www.pspmod.com/forums/introdu...uncements.html
    Reply With Quote  
     

  14. #14  
    Junior Member
    Join Date
    Jun 2010
    Posts
    1
    dang can anyone please help me out i have cfw 5.00 m33.6 and it gives me the error "game cannot be started" and idk what to do!!!
    Reply With Quote  
     

  15. #15  
    Member PSP User aSkHiTmAn XD's Avatar
    Join Date
    May 2010
    Posts
    65
    thanks for the heads up hitokiri
    Reply With Quote  
     

Page 1 of 3 123 LastLast

Similar Threads

  1. Error Code 80110306
    By Shpinxis in forum PSP Software, Firmware & Plugins
    Replies: 3
    Last Post: 03-07-2010, 05:38 PM
  2. error code 80020148
    By assimo in forum PSP Software, Firmware & Plugins
    Replies: 17
    Last Post: 07-31-2009, 12:48 AM
  3. error code
    By kjaved373 in forum PSP Emulation
    Replies: 1
    Last Post: 12-28-2008, 08:10 PM
  4. region error code
    By Kurust in forum PSP Hardware & Repair
    Replies: 0
    Last Post: 12-26-2007, 03:27 AM
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •