[admin]

Intro : Hi in this guide I will show you how to enable your PSP3000 to play homebrew games / applications / emulators. Please note this will work on any PSP SLIM

1. First of all get the file from our download section, http://www.pspmod.com/forums/downloa...ew-enabler-68/ unzip the files and click on the folder.

2. Connect your psp to the usb. Take note what drive your PSP maps to. now go back to the folder where the files are downloaded and click on go.bat, enter the drive letter of the PSP and then follow the prompts. The batch file will copy all the required files in to the right locations.

3. Your PSP needs to be running PSP Firmware 5.03, to verify what firmware version you are running go to the settings menu on ur PSP (The left most menu) then scroll down to system settings then click on system infotmation your firmware version will be shown here. If you are not running PSP Firmware 5.03 update by going to the game menu, and click on the memory and then run the 5.03 update. Follow the on screen prompts to install the 5.03 firmware

4. When you are running firmware 5.03 go to the photo menu, select the memory card and press X , you should now see a Chickhen folder, click X again, now as soon as the next screen appears hold down the left down button until you get to the bottom picture. If your PSP powers off you need to turn your PSP back on and repeat step 4. It usually takes me 4 - 6 times until it works. You know the hen is loaded successfully when your PSP restarts by its self.

To verify the hen is loaded go to the settings menu on ur PSP (The left most menu) then scroll down to system settings then click on system information your firmware version should read "5.03 Chickhen R2" If it does ready this you can now enjoy homebrew

But beware as soon as you turn your PSP off you will need to repeat step 4

Below is a video I created to show you how to do the above

+ YouTube Video

please note PSPMOD can not be held responsible if you damage your PSP

[Frak0]

Wow

Thank you , thought no way when I read the email; waiting on feedback, then will try it.

[grex]

wow thats amazing i am going to test it right nowwww...

[keayjo]

Hi. Im running version 5.50. Will this still work?

[krypticos]

the go.bat file and everything that you show in the video i dont see i get 3-4 folders slim fat eboot ect... can you post where the files/folders go.

[kietotheworld]

Where can I get 5.03?

[Killer]

Originally Posted by keayjo

Hi. Im running version 5.50. Will this still work?

No. 5.03 only.

To the person who wants to update to 5.03, get it here - RapidShare: Easy Filehosting

[migue95]

i dont see any .bat file
i only see Eboot, PHAT, SLIM and h
please upload the .bat file

[kietotheworld]

Originally Posted by krypticos

the go.bat file and everything that you show in the video i dont see i get 3-4 folders slim fat eboot ect... can you post where the files/folders go.

I also have this problem.

[daemonoid]

if anyone tests this please do reply on the results........

Eagerly waiting for ur replies

[Killer]

Originally Posted by daemonoid

if anyone tests this please do reply on the results........

Eagerly waiting for ur replies

What do you mean test? Thousands of people have already run it, it's working.

[snowpin]

Will this work on a TA-088 v3 MOBO???

[danos]

Originally Posted by snowpin

Will this work on a TA-088 v3 MOBO???

yes it will.

[Killer]

Originally Posted by snowpin

Will this work on a TA-088 v3 MOBO???

This works on EVERY SINGLE PSP, No matter what motherboard or type, 1000/2000/3000. The only stipulation is that is has 5.03 firmware (or lower that you can update).

Just don't try and flash anything on a TA-088v3 or 3000, because you'll brick them.

[windrider]

Originally Posted by kietotheworld

I also have this problem.

You are correct. That is all I see in the files also.. Doesn't look the same as in the video.