INSTALLATION
I'm going to attempt to explain how to get this working. These steps are all
necessary and you should pay close attention to them.
1) Open the PSP directory and edit the proper wifi.cfg for your PSP version
and set the IP of the computer you are going to use this on. If you don't
know your IP address. Go to your "Start" menu. Click on "Run..." When the
box opens up type "cmd.exe" without the quotes. When the command prompt
opens type "ipconfig" without the quotes. It will report your IP address.
2) Copy the correct director(y|ies) to your PSP depending on whether you have
a v1.00 or v1.50 PSP. If you use a custom firmware mod that allows the use
of a single EBOOT.PBP files on a v1.50 PSP then you can use the v1.00
directory.
(Copy the %__SCE__wificontroller and __SCE__wificontroller folders to GAME150 on your PSP.)
3) Download and install PPJoy.
PPJoy - Parallel Port Joystick driver for Windows 98, Me, 2000 and XP (Download this version, 10001downloads.com - Free Download Center - free software download, free game download, download freeware and shareware software, KaZaA, Morpheus Free Realplayer, Winzip, Winmx, AOL Instant Messenger,WinAmp,Media Player, Windows Media Player,iMesh,In)
4) After it is installed open up your "Control Panel" and click on "Parallel
Port Joysticks".
5) When the window comes up click "Add..." at the bottom. On the next screen
change "Parallel port" to "Virtual joysticks" and then click "Add."
6) It will want to install some drivers so either have it scan automatically
or point it to the directory you installed PPJoy to.
7) After it is done installing, click the "PPJoy Virtual joystick 1" in the
menu and click "Mapping..."
8) Choose "Set a custom mapping for this controller" and click "Next."
9) Set these options for best results.
Axes = 2 (X Axis and Y Axis)
Buttons = 9
POV hats = 1
10) X Axis = Analog 0
Y Axis = Analog 1
11) These buttons are up to you to set. You should leave "Button 1" set to
"nothing" otherwise you may have problems using the Triangle button on
your PSP later.
Button 1 = nothing
Button 2 = Digital 0
Button 3 = Digital 1
Button 4 = Digital 2
Button 5 = Digital 3
Button 6 = Digital 4
Button 7 = Digital 5
Button 8 = Digital 11
Button 9 = Digital 10
12) Directional button POV
North = Digital 6
East = Digital 7
West = Digital 9
South = Digital 8
13) Repeat steps 5 to 12 to add up to 4 joysticks (this is the maximum amount
that WiFiController will support at the moment).
14) Inside the PC directory, you will find a WiFiServer.exe.
If you are
just using one PSP to play games, you can run this file directly. (Make sure this file is always running, if you see it is not, run it again.) If,
however, you are or will be using more than one PSP, you will need to
run one of the batch files in the directory. Simply double-click the
batch file for the appropriate controller. You must have a server
running for each controller you wish to use. The server(s) must also be
running at all times while using the PSP as a joystick. When you are
done using it, you can safely exit the program by pressing CTRL+C or
clicking the close button for the window.
Example:
Two players will be playing a game. You will need to start the batch
files for controller 1 and 2. Player 1 will choose Controller 1 from
WiFiController and player 2 will choose Controller 2.
Note:
If the window opens and closes immediately, something went wrong and
you'll need to either contact me or figure it out yourself. However,
make sure you RETRY all the steps before contacting me. Also try
reading over the WiFiController website and the PPJoy website for help.
15) Now start the program on your PSP, choose your connection and your
controller. It should connect to your computer and basically be working.
You'll find out in the next step.
16) Go back to your Control Panel and go to Game Controllers. Click on "PPJoy
Virtual joystick 1" and choose Properties. On the screen that comes up
you should be able to press buttons on the PSP and have them show as
working on the screen. I recommend calibrating the Analog Stick too.
17) Enjoy!
Few simple questions.
Linear Mode
