[WTS] Psp slim parts sale! (check it out)

[Litho]

Hey everyone,

Ok, so I've posted this on Acidmods.com and I'm up to post it here. I completely understand that my name on the paper is not my forum name. I would be happy to take these pictures again with my pspmod.com forum name, however the products are already packaged in bubble wrap, therefor you will SEE the products with this forums name however it'll have bubble wrap, you can also see my writing is the same if that's used to verify. I hope to do successful business with you all, feel free to PM me with any questions ... Also, the pictures with this forum name with bubble wrap is at the bottom of this post.
---

This item ships from CANADA.

I have purchased a psp slim on June 30, however I did not open it until 2 weeks after that because I was waiting for a screwdriver from hong kong to make sure I do not strip my screws.

I believe I've followed the forum rules, please let me know if there is any sort of problem and we can talk.

If you would like to discuss, feel free to message me for my msn.

Thanks, and happy looking!

Picture 1:


This picture includes, Brand New Lcd screen (SOLD). Home bar’s ribbon cable (SOLD), UMD Drive with 4 screws (SOLD) d-pad (SOLD), analog nub (SOLD), piano black buttons (SOLD), memory stick slot (SOLD), and also the AV audio port (SOLD).

Picture 2:


This picture includes Brand New Piano black face plate (SOLD) with backplate (SOLD) and umd door removed (SOLD).

Picture 3: (sorry it's red, too lazy to take flash off, and when it's on, you don't see the clear stuff.)


This one includes, black buttons (again whoops) (SOLD), except the first picture I forgot to add the long "home" ribbon (SOLD), where you change volume, and home etc. also includes a clear faceplate and clear buttons.

Picture 4:


This includes, the clear backplate with door, theres a small chip, very small at the top, but it doesn't affect anything because it's covered by the faceplate. Also includes the new motherboard metal shielding (SOLD), umd door holder (included with umd door), 6 different clear joystick for your nubs $1 ea, and sticky-backed wifi. (SOLD)

Picture 5:
[IMG

Includes some 256mb sandisk (geniune) memory cards pro duo, comes with adapter and case to protect your memory cards. Also has 1 Sony Adapter.

Picture 6:


This picture includes some 30 AWG kynar wire (white) $ Free with solder vacuum, psp charge plug, solder $2 and psp back door it fits phat and slim psps, brand new never taken out of wrapping paper only $2 each. Also a soldering vacuum only $6.

I've also decided to upload my motherboard. Now, it's a functional one, (loads psp) however the umd clamp is broken, also I was bridging the wifi connection into one wire, so you might see some solder (very small, vacuumed up most of it) also the speaker - and + was soldered on, but it's vacuumed, same for the 5v point, but it all works. I've removed the wires twice, and both times the leds were working. Also, the UMD backlight clamp is not there, (the thing you use to close the wire) however, you can still use it, even though theres no clamp. It seemed to work fine for me when I connected my lcd screen there, you can also use something to close it shut.

Here are two picture, I apologize if it's not the best quality, my camera is not that great, but I'm happy to have it.

1.

2.

Hmm, I've seen prices from $70-90, I'll give mine for $50 Shipped world wide.

For shipping, it really depends on the item's size. If it's small, there will be a small fee of $0.50 to Canada (envelope) USA $1.50, and International $2.25. If the size is big, for example a Faceplate, shipping is slightly higher, $2.20 for Canada, $3.10 for USA and $4.90 for International. I DO combine shipping, so if you decide to buy multiple items, of course you won't have to pay the shipping fee for every item, we can discuss about that on Pms, / MSN. (pm me for my msn)

If you just have any general questions about these items, Pm me

I can take Paypal since I probably should since I'm a "newbie" here.

Thanks all.

History of sales:

The following items have been reserved:

1. Piano Black FACEPLATE
2. Black joystick
3. L and R triggers
4. Black buttons

----------


Special for pspmod.com: (please look at the pictures above for a more "easy to see type")

Picture 1:



Picture 2:

http://i343.photobucket.com/albums/o...Picture026.jpg

Picture 3:

http://i343.photobucket.com/albums/o...Picture027.jpg

http://i343.photobucket.com/albums/o...Picture028.jpg

Picture 4:

http://i343.photobucket.com/albums/o...Picture030.jpg

Picture 5:

http://i343.photobucket.com/albums/o...Picture032.jpg

Picture 6:

http://i343.photobucket.com/albums/o...Picture038.jpg

That's about it, feel free to PM me for my msn / discuss about anything. If theres something I have to add because of the rules, please let me know. However I believe I've followed them well.

Thank you.

The items with (SOLD) written after it means the item is sold (o.O)

[Intergalactic Captain]

EDIT - didn't realize you were canadian, shipping takes too long even just over the border.

[Litho]

Originally Posted by Intergalactic Captain

EDIT - didn't realize you were canadian, shipping takes too long even just over the border.

It's np, I'll edit my post to make sure people know for sure.

[hornet2011]

how much are the memory cards???

[topeira]

Hi mate... Im interested in the motherboard.. how much for it. Im from Portugal..